We – EPG Group the most significant couplings and gears manufacturing facility in China with five diverse branches. For more specifics: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828 /
Between 1930 and 1945, engineers developed a wide assortment of coupling varieties that we even now use today, this sort of as jaw couplings, disc couplings, gear couplings, chain couplings, slider block couplings, and grid couplings. For the duration of the late 40s and on by means of the 50s, companies created tons of improvements in the region of coupling misalignment allowance and electricity. This was largely in response to the introduction of new products, this sort of as rotary tools, that essential lighter bodyweight couplings, couplings that could move more quickly, and couplings that could accommodate for misalignment. China gear coupling hole Meanwhile, our items are created according to higher high quality requirements, and complying with the intercontinental sophisticated regular conditions.
- Customized Stainless Metal/Carbon Metal/metal Misplaced Wax Casting/precision casting steel connector/pipe fitting/foundation/equipment/cap/washer/bracket/flange/coupling
- Materials:
Stainless Metal: JIS SCS1, SCS2, SCS13, SCS13L, SCS14, SCS14L/ DIN G-X7Cr13, G-X20Cr14, G-X6CrNi18 nine, G-X6CrNiMo18 ten, 1.3955, one.4308, 1.4408, 1.4581 / ASTM/AISI CA-15, CA-40, CF-three/304L, CF-3M/316L, CF-eight/304, CF-8M/316, and so forth Carbon Metal: JIS SC450, SCC5 / DIN GS-45, GS-60 / ASTM WCB, 450-240, eighty-forty, and so forth Alloy Metal: JIS SCW480, SCSiMn2, SCCrMn3 / DIN GS-20Mn5, GS-37MnSi5, GS-34CrMo4, and many others Warmth Resistance Metal: JIS SCH13, SCH21, SCH24/ DIN G-X15CrNiSi25 twenty one.4840,G-X45CrNiSi35 25 one.4857 / ASTM HN, HK30, HK, HK40, HHM HP, HT Bronze or Copper: JIS BC6, ALBC6, and so on Other materials Carbon Steel, Alloy Metal, Hight Manganese Steel, Device steel, Warmth-resistant Steel, Al-Si Alloy, etc also accessible according to customer’s ask for.
- Essential files for offer to be offered by buyer:
Drawings with formats of IGS (3D), DWG or DXF (Vehicle CAD 2nd), PDF, JPG
Common of material (Preferable to provide Element Percentage of C, Si, Mn, P, S, and many others and Physical/Machanical Properties of the substance)
Complex needs
Unit Weight of Rough Casting
Creation technological innovation: Lost-wax casting/investment casting
- Major generation tools:
Vertical wax-injectors
Sand glueing tanks
Wax-evaporator
Intermediate frequency electrical induction furnaces
Spectrum analyzer
Shot blast equipment
Warmth treatment method furnaces
Heat remedy h2o tank
Acid solution and h2o cleansing tank
Buffing / polishing machines / Electrical sharpening
- Unit bodyweight: 1.2g~eighty,000g per piece
- Other details:
Taper gap, deep hole, bent hole D>Ø2mm L=1D
Bare minimum outside radius R0.3mm, minimal inside of radius R0.5mm
Least thickness of one.5mm, some areas with minimum thickness of .8mm
- Tolerance of dimension for cast:
Dimension Selection (mm) Frequent Tolerance Particular Tolerance < 25 +/- .twenty five mm +/- .13 mm twenty five ~ fifty +/- .forty mm +/- .25 mm 50 ~ one hundred +/- .80 mm +/- .50 mm > 100 +/- 1 % +/- .5 % - Minimal buy: No restrict
- Supply: Within 30 working times right after signing of deal and confirmation of samples by shopper
- Technological procedure:
- Workshop:
- Some Goods:
- Screening equipments:
- Shipments:
- Organization details:
- Certifications:
/ The use of authentic equipment manufacturer’s (OEM) component numbers or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating product use and compatibility. Our organization and the listed replacement parts contained herein are not sponsored, approved, or created by the OEM.
