Cyclo Drive Reducer

Cycloidal pinwheel reducer can be a up-dated of innovative type transmissing machine designed with K-H-V less pearly whites engagement and the cycloidal pin steering wheel clenching mechanism, which are trusted in drive and lowering of textile and dying, foodstuff, mining and metallurgy, Oil and chemical job machinery etc, Market, cranes and conveyors. various fields.

1. Gear is made of high strength low carbon alloy steel by carburizing and quenching. The hardness of tooth surface area can reach HRC58-62. CNC grinding technology is followed for all gears, with huge precision and good contact performance
2. high transmission performance: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable operation and low noise;
4, compact structure, light weight, long service existence and high bearing capacity;
5. easy to check, assemble and disassemble.

Operation specifications and precautions
1.High modularization design: many equip with various motor or other power insight conveniently.Same machine type may equip with many power motor. It really is easy to understand the combination and
junction between every equipment type.
2.Transmission ratio: okay division, wide scope. The combined machine type may form large transmission ratio, i.e. outcome very low rotary speed.
3.Form of unit installation: the position to be installed is not limited.
4.High strength, compact: the box body is constructed of large strength cast iron. Gear and equipment shaft adapts the gas carbonization, quenching and good grinding process, which means bearing ability of unitvolume is excessive.
5.Long life: Beneath the condition of correct type chosen (including choosing appropriate operation parameters)normal procedure and maintenance, the life span of main elements of speed reducer (except wearing parts) should not be significantly less than 20000 hours. The using parts include lubricating bearing, oil seal and oil.
6.Low noise: because main parts of speed reducer are processed, assembled and tested critically,therefore the noise of speed reducer is definitely low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High swiftness ratio and efficiency
Single stage transmission can reach to 1 1:87 of speed-downward ratio and the efficiency is definitely more than 90%. If use multi-speed get the speed-down ratio is usually bigger.
2. Compact
Being adapted epicyclic transmitting basic principle, the input and end result shaft are at same axis middle, it is compact.
3. Smooth and steady run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is bound anyway content.
1. Large deceleration ratio
A high deceleration ratio of 1/30-1/320 can be obtained.The structure is simple, but it can realize high reduction ratio product.
2. Small gear clearance
The Get, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are involved at the same time, and there are several gears engaged with 180 degree symmetry. Therefore, the impact of tooth pitch mistake and cumulative tooth pitch error on the rotation precision is relatively average, which makes the positioning precision and rotation accuracy reach a very high level.
4. Less parts, convenient installation
The three basic pieces achieve a high deceleration ratio, plus they are all on the same axis, so the kit is simple to install and easy to shape.
5. Small in proportions and light in weight
Compared with the previous gear device, the quantity is 1/3, the weight is 1/2, but can buy the same torque capacity and reduction ratio, reaching small lightweight.
6 High torque capacity
Flexible wheel materials USES unique steel with substantial fatigue strength.Different from ordinary transmission product, the quantity of teeth meshing makes up about close to 30% of the full total quantity of teeth. Furthermore, it is in get in touch with with the surface, so that the pressure borne by each equipment is reduced and large torque ability can be obtained.
7 High efficiency
The sliding of gear meshing parts is quite small, which reduces the energy loss due to friction. Therefore, high reduction ratio may be accomplished while maintaining high efficiency, and miniaturization of generating motor could be realized.
8. Low noise
The apparatus meshing cycle quickness is low, the transmission activity force balance, which means procedure is quiet, and the vibration is very small.
◆Great speed ratio and great efficiency single-stage transmission can perform a deceleration ratio of 1 1:87, and the efficiency is a lot more than 90%. If multi-stage transmission is used, the deceleration ratio will end up being larger.
◆Because planetary transmission basic principle is adopted, the insight shaft and outcome shaft are on the same axis line, to ensure that the machine version can get the tiniest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is greater, and the mechanism of balancing machine parts will make the vibration and voice limited by a minimum.
◆Reliable use and prolonged service life since the key parts are made from substantial carbon chromium steel, large strength is definitely obtained by quenching (HRC58-62), and rolling friction can be used in a few transmission contacts, so the service life is lengthy.
Cycloid reducer is definitely a cycloid needle teeth meshing planetary transmission principle drive models, is a great transmission has various advantages, versatile, and can be both positive and negative operation.

•Big ratio, and great efficiency Smooth operation,

• low noise The use of reliable,

• extended life can reach 50000 hours

• Main parts high-carbon the Ming-steel after quenching treatment (HRC58-62),

• operation and contact with rolling friction, basically very little wear, durable.

• Compact structure,

• small size Because the utilization of a planetary transmitting, the input shaft and the outcome shaft on a single axis, making the model to obtain the smallest possible size.

• Reasonable design, easy repair, and breakdown easily install,

• minimal number of parts together with simple lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt integral double wall world pinion precision, carrier and increase the output strength.

(2).Hoop clamp coupling have five connection techniques suitable for different application environments.

(3).Size over PL/PF120(incorporating)precision and high strength integral inner gear casing, processed in a single station,which eliminate the cumulative mistake and assembling error of split type.Get rid of casting process;adopt scorching of forging process, which will decrease the blank material defects.

(4).The meshing equipment adopt shaving process after carburizing and quenching,which better to make gear surface smooth and high accuracy,reduce the temperature rising caused by gear surface area gluing and friction.
This series worm-gear reducer was designed after RV worm microreducer, that have a complete norm, wide speed for selection, and many mounting positions. Its overall performance and mounting dime nsions conform the same sorts of foreign.
The combo of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, compact structure, beautiful shape, low noise and radiate heat efficiently.
Good sealing and adaptability.Its mixture with T gear reducer and MB/MBN variator can meet all sorts of speed requirement.


flexible disc coupling

As one of leading flexible disc coupling manufacturers, suppliers and exporters of mechanical products, We offer flexible disc coupling and many other products.

Please contact us for details.


Manufacturer supplier exporter of flexible disc coupling.

Recent Posts