China ISO5675 Ball Valves Type Hydraulic Quick Coupling of Steel or Brass coupling pipe

Solution Description

YCC ISO5675 Ball valves type hydraulic fast coupling
of metal or brass

 

[Application]: 
Are widely employed for coupling in industrial fields, such as development equipment, forest quipment, hydraulic equipment instruments, petroleum tools, steel products and other hydraulic gear or instruments, they are also employed for chemical fluid, steamand fuel pipes.

[Specification]:
Item identify:
 ISO5675 Close sort hydraulic swift coupling of metal
Kind: YCC Collection
Standard:  ISO5675
Material: Brass
Dimension: 1/4″-2″
Doing work temperature:  -20ºC ~ +100ºC

Characteristics:
Poppet valves obtainable to prevent uncoupled leakage.
Poppet valves open instantly when coupled, inside rated functioning stress,
                      to maintain the flow expeditely.
Key areas are induction hardened for a greater longevity.
Fuction trustworthy ball-lock technique combines 2 marched fifty percent parts jointly.
Male coupling and feminine coupling are machined from reliable steel bar stock.
These couplings reach ISO5675 standard.

Our fittings merchandise:
1. Swaged Metric Fittings

Mertic Flat Seal Fittings       Metric Multiseal Fittings      Metric 60°Cone Seal Fittings 

Metric 74°Cone Seal Fittings

Metric 24°Cone O-RING Seal L..T Fittings

Metric 24°Cone O-RING Seal H.T.Fittings

Metric Standpipe Straight Fittings      JIS Metric 60°Cone Seal Fitting

2. Swaged British Fittings

BSP O-RING Seal Fittings    BSP Flat Seal Fittings

BSP Multiseal Fittings    BSP 60°Cone Seal Fittings    BSPT Fittings

JIS BSP 60°Cone Seal Fittings

3. Swaged American Fittings

SAE O-RING Seal Fittings         ORFS Flat Seal Fittings

NPSM 60°Cone Seal Fittings       JIC 74°Cone Seal Fittings

NPT Fittings       SAE Flange L.T. Fittiings       SAE Flange H.T.Fittings

4. Staplelok Fittings

Banjo    Double connection Interlock Hose Fittings

5. Ferrule

FERRULE for SAE100R1AT/ EN 853 1SN HOSE

FERRULE for SAE100R1A EN 853 1ST HOSE

FERRULE for SAE100R2AT/DIN20571 2SN HOSE

FERRULE for SAE100R2A/EN 853 2SN HOSE

FERRULE for SAE100R1AT-R2AT,EN853 1SN-2SN and EN 857 2SC

FERRULE for 4SP,4SH/10-16,R12-06-sixteen HOSE

FERRULE for 4SH,R12/32 HOSE

6. Metric Adapters

Metric Thread O-RING Face Seal Adapters

Metric Thread Chunk Type Tube Adapters

JIS Metric Thread 60°Cone Adapters

Metric Thread 74°Cone Flared Tube Adapters

seven. British Adapters

BSP Thread 60°Cone Adapters

JIS BSP Thread 60°Cone Adapters

BSPT Thread Adapters

eight. American Adapters

ORFS Adapters JIC 74°Cone Flared Tube Adapters

NPT Thread Adapters

Couplers and clamps: 

European / American / Austraulia type camlock, pin-plug and clamps for massive size hoses with NPT, BSP thread.

OUR Info AND Items

We are producer focus in rubber hose and fittings for 20 many years, and we have been named as ‘The nicely-recognized trademark enterprises” and “The greatest top 10 enterprises” in China.

1. SAE one hundred R1AT, R2AT, R5, R7, R8, R12, R13, R15

two. DIN EN 853 1SN, 2SN  EN 856 4SP, 4SH, EN 854 1TE

three. Flame resistant hose / Fire suppression hoses, Rotary drilling hose

four. Air / Water hose, Oil Hose, Drinking water /Petroleum suction and discharge hoses, Slurry/mud /cement hose

5. Plastic Spiral Guard for Hydraulic Hose

6: All fittings and assemblies.

OUR Service:

one: High quality with aggressive price (We are manufacturer/factory)

two: Worldwide innovative equipment. (Knitting machine of Germany MAYER,

three: Wire wrapping equipment of South Korea SUNGIL, Burst-screening device of MAXIMATOR, Impulse-screening equipment of  BIMAL)

4: Distinctive product design with outstanding manufacturing technologies

five: Strict quality assurance system

six: We can offer Free SAMPPLE for our clients

seven: We can crimp hose assembly for our consumers.

8: We welcome clients to pay a visit to our factory leading to much better understanding of our production

 

US $0.5-20.1
/ Piece
|
200 Pieces

(Min. Order)

###

Standard: ISO
Material: Stainless Steel
Connection: Male or Female
Surface Treatment: Induction Hardened
Head Type: Equal
Thread: Zg/G/NPT

###

Customization:
US $0.5-20.1
/ Piece
|
200 Pieces

(Min. Order)

###

Standard: ISO
Material: Stainless Steel
Connection: Male or Female
Surface Treatment: Induction Hardened
Head Type: Equal
Thread: Zg/G/NPT

###

Customization:

Types of Coupling

A coupling is a device used to join two shafts together and transmit power. Its primary function is to join rotating equipment and allows for some end movement and misalignment. This article discusses different types of coupling, including Magnetic coupling and Shaft coupling. This article also includes information on Overload safety mechanical coupling.

Flexible beam coupling

Flexible beam couplings are universal joints that can deal with shafts that are offset or at an angle. They consist of a tube with couplings at both ends and a thin, flexible helix in the middle. This makes them suitable for use in a variety of applications, from motion control in robotics to attaching encoders to shafts.
These couplings are made of one-piece materials and are often made of stainless steel or aluminium alloy. However, they can also be made of acetal or titanium. While titanium and acetal are less common materials, they are still suitable for high-torque applications. For more information about beam couplings, contact CZPT Components.
Flexible beam couplings come in a variety of types and sizes. W series couplings are good for general purpose applications and are relatively economical. Stainless steel versions have increased torque capacity and torsional stiffness. Flexible beam couplings made of aluminum are ideal for servo and reverse motion. They are also available with metric dimensions.
Flexible beam couplings are made of aluminum alloy or stainless steel. Their patented slot pattern provides low bearing load and high torsional rigidity. They have a long operational life. They also require zero maintenance and can handle angular offset. Their advantages outweigh the disadvantages of traditional beam couplings.
gearbox

Magnetic coupling

Magnetic coupling transfers torque from one shaft to another using a magnetic field. These couplings can be used on various types of machinery. These types of transmissions are very useful in many situations, especially when you need to move large amounts of weight. The magnetic field is also very effective at reducing friction between the two shafts, which can be extremely helpful if you’re moving heavy items or machinery.
Different magnetic couplings can transmit forces either linearly or rotated. Different magnetic couplings have different topologies and can be made to transmit force in various geometric configurations. Some of these types of couplings are based on different types of materials. For example, a ceramic magnetic material can be used for applications requiring high temperature resistance.
Hybrid couplings are also available. They have a hybrid design, which allows them to operate in either an asynchronous or synchronous mode. Hysterloy is an alloy that is easily magnetized and is used in synchronous couplings. A synchronous magnetic coupling produces a coupled magnetic circuit.
Magnetic coupling is a key factor in many physical processes. In a crystal, molecules exhibit different magnetic properties, depending on their atomic configuration. Consequently, different configurations produce different amounts of magnetic coupling. The type of magnetic coupling a molecule exhibits depends on the exchange parameter Kij. This exchange parameter is calculated by using quantum chemical methods.
Magnetic couplings are most commonly used in fluid transfer pump applications, where the drive shaft is hermetically separated from the fluid. Magnetic couplings also help prevent the transmission of vibration and axial or radial loads through the drive shaft. Moreover, they don’t require external power sources, since they use permanent magnets.

Shaft coupling

A shaft coupling is a mechanical device that connects two shafts. The coupling is designed to transmit full power from one shaft to the other, while keeping the shafts in perfect alignment. It should also reduce transmission of shock loads. Ideally, the coupling should be easy to connect and maintain alignment. It should also be free of projecting parts.
The shaft couplings that are used in machines are typically made of two types: universal coupling and CZPT coupling. CZPT couplings are designed to correct for lateral misalignment and are composed of two flanges with tongues and slots. They are usually fitted with pins. The T1 tongue is fitted into flange A, while the T2 tongue fits into flange B.
Another type of shaft coupling is known as a “sliced” coupling. This type of coupling compensates for inevitable shaft misalignments and provides high torque. Machined slits in the coupling’s outer shell help it achieve high torsional stiffness and excellent flexibility. The design allows for varying engagement angles, making it ideal for many different applications.
A shaft coupling is an important component of any machine. Proper alignment of the two shafts is vital to avoid machine breakdowns. If the shafts are misaligned, extra force can be placed on other parts of the machine, causing vibration, noise, and damage to the components. A good coupling should be easy to connect and should ensure precise alignment of the shaft. Ideally, it should also have no projecting parts.
Shaft couplings are designed to tolerate a certain amount of backlash, but it must be within a system’s threshold. Any angular movement of the shaft beyond this angle is considered excessive backlash. Excessive backlash results in excessive wear, stress, and breakage, and may also cause inaccurate alignment readings. It is therefore imperative to reduce backlash before the shaft alignment process.
gearbox

Overload safety mechanical coupling

Overload safety mechanical couplings are devices that automatically disengage when the torque applied to them exceeds a specified limit. They are an efficient way to protect machinery and reduce the downtime associated with repairing damaged machinery. The advantage of overload couplings is their fast reaction time and ease of installation.
Overload safety mechanical couplings can be used in a wide range of applications. Their automatic coupling mechanisms can be used on any face or edge. In addition, they can be genderless, incorporating both male and female coupling features into a single mechanism. This means that they are both safe and gender-neutral.
Overload safety couplings protect rotating power transmission components from overloads. Overload protection devices are installed on electric motors to cut off power if the current exceeds a certain limit. Likewise, fluid couplings in conveyors are equipped with melting plug elements that allow the fluid to escape when the system becomes too hot. Mechanical force transmission devices, such as shear bolts, are designed with overload protection in mind.
A common design of an overload safety mechanical coupling consists of two or more arms and hubs separated by a plastic spider. Each coupling body has a set torque threshold. Exceeding this threshold may damage the spider or damage the jaws. In addition, the spider tends to dampen vibration and absorb axial extension. This coupling style is nearly backlash free, electrically isolating, and can tolerate very little parallel misalignment.
A mechanical coupling may also be a universal joint or jaw-clutch coupling. Its basic function is to connect the driver and driven shafts, and limits torque transfer. These devices are typically used in heavy-duty industries, such as steel plants and rolling mills. They also work well with industrial conveyor systems.
gearbox

CZPT Pulley

The CZPT Pulley coupling family offers a comprehensive range of couplings for motors of all types. Not only does this range include standard motor couplings, but also servo couplings, which require ultra-precise control. CZPT Pulley couplings are also suitable for engine applications where high shocks and vibrations are encountered.
CZPT Pulley couplings have a “sliced” body structure, which allows for excellent torsional stiffness and strength. They are corrosion-resistant and can withstand high rotational speeds. The couplings’ design also ensures accurate shaft rotation while limiting shaft misalignment.
CZPT Pulley has introduced the CPU Pin Type couplings, which are effective at damping vibration and maintain zero backlash. They are also made from aluminum and are capable of absorbing heat. They come with recessed tightening screws. They can handle speeds up to 4,000 RPM, and are RoHS-compliant.
China ISO5675 Ball Valves Type Hydraulic Quick Coupling of Steel or Brass     coupling pipeChina ISO5675 Ball Valves Type Hydraulic Quick Coupling of Steel or Brass     coupling pipe
editor by czh 2023-01-24

flexible disc coupling

As one of leading flexible disc coupling manufacturers, suppliers and exporters of mechanical products, We offer flexible disc coupling and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of flexible disc coupling.

Recent Posts