Any harm to the teeth surfaces of the sprocket diminishes the daily life on the conveyor chain.
With typical sprockets, considerably worn sprocket teeth were repaired by teeth padding or even the total sprocket was replaced. In either situation, repair was expensive and with teeth padding, accuracy was impaired. We created new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our buyers for that dramatic cost savings in cost and time.
Framework
The teeth can be replaced by two procedures: individual tooth replacement or sectional teeth replacement.
The bolts and nuts utilized for mounting the teeth on on the sprocket are spot-welded to avoid loosening.
The respective structures are illustrated on the right.
The above photograph along with the leading correct illustration demonstrate a sprocket for personal tooth replacement. Since the joint face concerning the replaced teeth plus the sprocket is formed in the exceptional arc, the bonding accuracy is substantial along with the sprocket power is enhanced. On top of that, since the load acting to the mounting bolts is decreased, there exists significantly less probability of loosening. This sprocket development is patented.
You will discover two kinds of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are applied for big sprockets getting hefty loads and welded sheet steel hubs for other applications.