Rugged construction Fashion “MD” Buckets are most common for basic goal elevators. Covering a wide selection of sizes from 4 to twenty inches extended, they are used for ?ne and medium dimension resources such as coal, cement, pulp, grain, ear corn, and so on. These are broadly applied for heavy abrasive supplies such as sand, gravel, and stone. Reinforced front lips give Style “MD” Buckets a long wearing digging edge. Uniform wall thickness and strong corner reinforcement make them stronger than steel buckets on the same gauge.They are smoothly surfaced and have ends sloped inward at 6 degree angles to insure correct ?lling and clean discharge. Available in Malleable and Al-lied-Locke Promal.
Chain for which buckets can be found in-clude: Steel Bushed Roller, Steel Bushed, Combination, “H” Class Mill, 400 Class Pin-tle, and 700 Class Pintle. “MD” Buckets are applied with G1, G6, K1, or K2 design attach-ments once they are available while in the chain sort.
Capacities are for buckets ?lled to the line XX (see diagram). The sensible working capacity will vary with the loading conditions, angle of re-pose on the materials being dealt with, as well as incli-nation on the elevator.
Type “AC” ELEVATOR BUCKETS for handling cement, lime, and ?uffy resources
Fashion “AC” Buckets offer quick, thorough discharge of cement, lime, and also other dry, ?uffy components. Vent holes during the bottom of every bucket release trapped air in ?lling and let materials to empty from bucket promptly and completely on discharge. Furthermore to reinforcing lips, hooded backs reinforce “AC” Fashion Buckets. This attribute permits closer bucket spacing and presents 30% greater carrying capacity than other bucket styles with the similar length. These sturdy buckets have an additional thickness of metal at dress in points for longer service. Available in Al-lied-Locke Malleable and Promal.
Design “AC” Buckets are frequently utilised with hefty duty engineering chain this kind of as Bushed Steel Chain with K2 and K3 fashion attachments.
Capacities are for buckets ?lled to either line XX or YY (see diagram). The sensible operat-ing capability will differ with loading circumstances, angle of repose in the materials currently being handled, as well as inclination in the elevator.